Competition Cams High Energy Flat Tappet Camshaft 1963-1995 Ford 289-30231-115-4

$187.01 $135.99
(You save $51.02)
(No reviews yet) Write a Review
SKU:
CLR-COM-31-115-4
UPC:
036584600268
Competition Cams High Energy Flat Tappet Camshaft 1963-1995 Ford 289-30231-115-4

Competition Cam High Energy Flat Tappet Camshaft

#31-115-4 or 311154

NOTE: You Are Purchasing The Camshaft ONLY, All Other Part Numbers Show Below Are For Reference Purposes Only

Fits: 1963-1995 Ford Small Block 289-302 V8 Engines

Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 800-4,500
Intake Duration at 050 inch Lift: 192
Exhaust Duration at 050 inch Lift: 200
Duration at 050 inch Lift: 192 int./200 exh.
Advertised Intake Duration: 240
Advertised Exhaust Duration: 248
Advertised Duration: 240 int./248 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.416 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.416 in.
Valve Lift with Factory Rocker Arm Ratio: 0.416 int./0.416 exh.
Lobe Separation (degrees): 108
Computer-Controlled Compatible: No
Grind Number: FS 240H-8
Valve Springs Required: Yes

Quantity: Sold individually.

 

COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range for most street applications.

 

Recommended Components

Component Part Number
Rocker Pushrod RP-Kit RP1431-16 [35,38]
Lifter Kit 832-16
Timing Set 3230 [33] / 2120
Rocker Arms 1431-16 [35,56] / 1331-16 [1]
Push Rods 7831-16 [36] / 7631-16 [36]
Valve Springs 942-16 / 972-16
Steel Retainers 768-16 [3] / 743-16 [3]
Valve Locks 601-16
Valve Seals 502-16
Camshaft Break-In Lube 159
Installation Notes (These notes apply to the above recommended components with the trailing installation note numbers)
Note Description
1 [1] Requires screw-in studs & guide plates.
3 [3] Standard weight and lightweight retainers
33 [33] Pre-’72 engines use part #3220.
35 [35] Part #4504 studs required for ‘78-present.
36 [36] ‘62-’69 use part # 7632-16.
38 [38] For 1.7:1 ratio use #RP1453-16.
56 [56] If equipped with studs and guide plates use part #1442-16.
Automotive Performance and Restoration Parts For The Machine You Drive